To change the blade on a floorball stick, start by heating the blade fitting at the bottom of the shaft. The old blade is often held in place by heat, friction or adhesive and must be loosened carefully.
Follow these steps:
1. Heat the blade fitting with a heat gun or hair dryer for approximately 1–2 minutes, until the plastic begins to soften.
2. Carefully pull off the old blade. Use gloves or a cloth to avoid burning yourself.
3. Attach the new blade immediately while the shaft is still warm.
4. Adjust the angle of the blade for the correct side, either left or right.
5. Secure the blade with screws if there are screw holes.
6. Allow the blade to cool before using the stick. You can use cold water to help the blade cool and set more quickly.